Architects around the world put forward the concept of “dynamic architecture”, which means that some elements of the building can change in real time according to requirements without affecting the structural integrity of the building.
In addition to holding high-quality art exhibitions, it also focuses on holding various mass teaching activities to give the public the opportunity to touch the plastic arts.
Assemble it layer by layer along the fixed concrete main pole in the middle, which can shorten the completion time to the greatest extent.
Install each module in southern Italy in advance, configure all hydropower engineering system software and all interior decoration, and then transport it to Dubai, UAE for assembly.
This structure is called maharabiya shading system.
04 super overhang | tomorrow Museum museudo amanh ã Rio de Janeiro, Brazil tomorrow museum is located in Rio de Janeiro, Brazil.
The projection screen is designated to rotate four times a day, just like the “national dance family” blooming on the Bund of Shanghai.
The building was completed on December 17, 2015 and its design inspiration comes from the botanical garden of Rio de Janeiro.
When the building is completed, it will be the first building completely composed of pre-made parts.
This logical skin shape can be directly simulated with graphmapper, and can restore its dynamic change process.
The structural system is supported by two parallel and 47 degree inclined masts, one on the central axis of the roof and the other on the bridge leading to the entrance of the art museum, creating a poetic structural system and the overall effect of motion.
The dynamic process is mainly controlled by the trigger calculator.
The unfolding of the steel structure of Milwaukee Art Museum can also be simulated by GH, and the movement of the rod can be controlled by simple rotation.
The following article comes from: rhinoceros parameterized cloud platform human beings have always been good at changing themselves to adapt to their environment.
At the same time, the curtain wall is also coated with glass fiber.
Milwaukee Art Museum Milwaukee Art Museum is located on the Bank of Lake Michigan, Wisconsin.
It is a 145 meter high tower.
In order to make the dancing melody more vitality, the external metal curtain is composed of 675 aluminum alloys, which seems to have become a new landmark of the Bund.
Grasshopper is used to simulate the change effect of the skylight bar under the.
01 Dubai Da Vinci rotating tower dynamic tower the difference of Dubai Da Vinci rotating tower in the United Arab Emirates is not only the technical nature of the design scheme, but also depends on the game application similar to “Lego building blocks”.
If only from the perspective of form, it is relatively simple to build with grasshopper.
The tower body is wrapped by a screen and forms an independent triangular structure on the outer wall of the building two meters away from the inner wall.
The geometric vertical panel is adjusted through parameterization, so as to reduce solar energy and glare..
Each triangular individual swings with the movement of the sun.
In view of the nonlinear change of the rotation angle of the tower, it needs to be adjusted through function mapping.
Tomorrow Museum has created the requirements of a new generation of science and technology museums in the world, combining science with innovative design, and focusing on the sustainable development of the city.
The museum attracts visitors to five main areas: the universe, the earth, mankind, tomorrow and now.
Calatrava put the sunshade hundred pages of this part outdoors and strung them directly on the mast, just like a thin feather, adjusting its angle with the sun at any time.
Maharabiya shading system is developed by aedas’s calculation and design team.
Milwaukee Art Museum adjusts the movement of the external structure through mechanical transmission.
The Shanghai Fuxing Art Center is located in the Shanghai Bund financial city.
The main exhibition content is digital technology focusing on creativity, rather than physical exhibition.
Unlike ordinary buildings, this art museum also designed a set of sunshade hundred pages in the outdoor part, instead of putting all the hundred pages into the inner side of the glass window.
There is a wing like steel structure on the roof of the building, which is used to collect solar energy.
In fact, the overall composition logic is very simple.
05 al Bahar tower project in Abu Dhabi, United Arab Emirates was completed in June 2012.
Its functions integrate office, residence and hotel.
First determine the floor plan style, and then generate similar results through rotation.
It is designed by Calatrava, a famous Spanish architect.
The building has a continuous skylight design to adapt to changing environmental conditions.
It only needs to determine the positioning points at three groups of different positions in the early stage, and then grow the rod with uniform change according to the relationship of function mapping.
It is also the world’s first rotating skyscraper with wind power generation.
On the top of the building are two steel wings that can open like wings, which slowly open in the sun, like a moving building.
Designed by Calatrava, it has a clean white appearance and unique shape.
For example, the huge roof with big bird wings represents Calatrava’s aesthetics and has become a landmark building in Milwaukee.
In addition, the tower is equipped with solar panels, which can provide power for itself and adjacent buildings.
The larger appearance of the building is characterized by a three-story golden rotatable projection screen, which combines Chinese and Western elements, such as the crown of ancient China and the harp of western countries.
Many architects have used this concept to design buildings, so as to improve the performance of buildings, adapt to adverse environmental conditions, and improve aesthetic requirements to a great extent.
