Less consumption, fast installation, 20-25 cm spacing between each, 5.5 pieces per square meter (main and auxiliary keels) for the quasi floor! The characteristics of steel clad wood products are as follows: 1.
Beautiful and elegant, brightening the image.
During construction, the joints are flat and the shear wall angle is accurate.
The wall thickness of the ladle wood is between 1.2mm and 3mm, and it is formed by two-sided opening and four-sided opening.
Through double-sided punching and hole forming, the wood can be saved by 90%, the comprehensive energy consumption can be reduced by 70%, the comprehensive cost can be reduced by 60% – 80%, and the turnover times are more than 50 times that of the wood cube.
10.
The turnover times are 300-500 times, with high turnover rate, recycling and saving reinvestment.
9.
3.
Its structure and performance are the same as those of the vertical beam of the open column formwork support composite structure.
Wood stoppers: send the sawn raw wood from the warehouse to the sawing table, and wait for the square steel pipe to plug the wood; 6: Feeding: manually fix the logs sent by the wood grabbing machine to the sawing table; 7: After the finished products are formed, transport vehicles shall be loaded and sent to the required construction site.
11.
It can be reused for 10 years to save costs.
The hole type is 2.2cm wide and 15cm long, and the spacing between the two holes is 10cm-15cm, which means the weight is reduced- Advantages of steel wood keel reinforcement system – production process of steel wood keel: 1.
The outer sleeve and the beam core are punched with rectangular holes for adjusting the size of through wall screws.
5.
Internal and external corners: the external corners are used to connect the internal and external wall turns with the beams.
Large bearing capacity, Q235 carbon steel is adopted, which can be freely inserted to meet the building area of any size.
The top, wall and column are highly versatile, and no additional construction scheme is required.
2: Broken wood: cut into 2 m, 2.5 m, 3 m, 4 m regular length or special length according to the required length; 3: Blanking: the square steel pipe is cut according to the customized requirements.
4.
Seven specifications to meet various frames and frame shear structures.
3.
Vertical beam: it is formed by stamping and rolling with 2mm thick cold-rolled steel plate, and then welded.
6.
2.
It is composed of outer sleeve, flexible joint and beam core, and its height can be freely adjusted.
4.
Multi saw processing: peeling, cutting, and square steel pipe size according to specifications; 4: The steel pipe is stamped by the machine, and the hole position can be adjusted: 5.
The vertical beam and the formwork are fastened by through wall screws, and the formwork is not expanded during concrete pouring.
The steel clad wood does not need to be sawed off, and the steel clad wood is used for a long time, saving labor costs and material waste.
Material selection: select logs with large diameter, straight texture, uniform material and easy processing.
The length of 1.2-4 meters can be processed as required.
5.
Rigid beam body with large bearing capacity; Replace wood with steel, no consumables, and reduce waste.
The new type of steel clad wood is mainly applicable to the secondary keel in the horizontal structure formwork system of buildings, and can also be used in beam, wall and column formwork works.
The comprehensive cost is saved by more than 60%.
Consultation hotline: manager Xie 1993388330 steel and wood keel reinforcement system – steel and wood keel formwork support and reinforcement installation 1 Comparison between steel and wood keel and traditional wood: high flatness, good stability, anti distortion, large bearing capacity, long service time, wide use, many turnover times, energy saving and environmental protection.
2.
Part of the content of this article comes from the Internet.
The new steel and wood keel adopts Q235 galvanized square steel pipe with a wall thickness of 1.8 mm and a galvanized content of 60-80 g per meter.
6.
Strong versatility, applicable to any wall structure, flexible and convenient operation.
It can fully replace the 50x100mm (40 * 80) wood square commonly used in formwork construction, and can also be used for the back edge of vertical wall and column formwork works in combination with fastener type steel pipe scaffold.
Advantages of steel clad wood: 1.
If there is infringement, please contact Xiaobian to delete it! Hotline: manager Xie 19933883330..
Specification of steel and wood keel: 50 * 50mm, 40 * 60MM, 40 * 40MM, 50 * 70mm.
It is suitable for any wall height.
It is intuitive and easy to understand, easy to build and disassemble, and can be built without guidance.
8.
Good flatness, large bearing pressure, no need for secondary plastering.
Save labor, time, material and cost.
The installation speed is fast, and the construction efficiency is more than 3 times higher than that of the traditional wooden work.
Cross beam: the cross beam is composed of an outer sleeve, a beam core and a movable joint.
7.
