If the construction unit and general construction contractor involved in a project safety accident involve state-owned enterprises, the competent construction department supervising the accident project shall notify its state-owned assets supervision department.
（1） Carry out safety production re learning and re training.
3、 Work arrangement (I) enterprise self inspection and self correction.
Whether the construction unit registers the construction personnel of dangerous and large projects, and whether the relevant responsible persons perform their duties as required; 7.
A list of all self inspection and self correction conditions shall be established one by one.
The specific shutdown time shall be determined by each project department in combination with the actual situation and reported to the local regulatory department and the construction unit.
37 of the Ministry of housing and urban rural development), the circular on issues related to the implementation of the provisions on the safety management of high-risk divisional and subdivisional projects (jbz [2018] No.
The competent departments of cities divided into districts shall conduct full coverage supervision on the special rectification of counties (cities and districts) within their jurisdiction, focusing on the investigation and rectification of potential risks of major dangerous projects and the quality of investigation and rectification of counties (cities and districts).
Whether the information of dangerous and large projects is announced as required, and safety warning signs are set in dangerous areas; 5.
Each city divided into districts shall organize the training of all supervisors within its jurisdiction, supervise and guide the construction enterprises within its jurisdiction to implement the safety training.
Whether the identification of list of large and dangerous projects is complete and implement dynamic management; 2.
The project Department of the construction and supervision unit of the provincial housing construction municipal engineering project shall immediately carry out self inspection and self correction focusing on the special rectification of dangerous and large projects.
work objectives: compaction of the main responsibility of enterprise safety production through in-depth special actions, Further strengthen the safety management of large-scale dangerous projects, improve the list of large-scale dangerous projects in strict accordance with the requirements, clarify the corresponding safety management measures, prepare special construction schemes in strict accordance with the requirements, review and approve and organize expert argumentation of large-scale dangerous projects, organize construction in strict accordance with the schemes, eliminate potential safety hazards on the construction site in time, and effectively curb the occurrence of mass casualties, Promote the stable improvement of construction safety production situation in the whole province.
（3） Carry out hierarchical supervision.
（2） Strengthen safety supervision and law enforcement.
Whether the special construction scheme is prepared, reviewed and approved as required; 3.
Whether it is organized and implemented according to the special scheme; 2.
（2） Territorial supervision and inspection.
The provincial department shall carry out supervision in due time.
Through relearning and retraining, promote the whole industry to accurately understand and master the relevant regulations of dangerous and large projects, enhance the awareness of procedures and improve the safety management level of dangerous and large projects.
The provincial department shall organize the training of heads and business backbones of supervision institutions divided into districts and cities.
Whether the supervision unit has prepared supervision implementation rules and carried out special inspection in combination with the special construction scheme of dangerous and large projects; 8.
2、 Key points of rectification (I) construction of safety control system for large and dangerous projects, key rectification: 1.
Whether the site entity has potential safety hazards.
For the violations found in the inspection, adhere to “zero tolerance”, resolutely rectify the rectification, resolutely stop the work and resolutely punish the punishment..
（2） On site hidden danger investigation and key rectification of dangerous and large projects: 1.
4、 The work requires that this special rectification adhere to mobilization, investigation, rectification and supervision at the same time, and carry out self inspection and self correction and rectification of potential risks throughout the whole process of special rectification regardless of stages and links, so as to ensure that comprehensive rectification is implemented in place.
Whether the dangerous and large projects to be accepted are accepted as required, and the acceptance signboard is set; 9.
Whether the scheme disclosure and safety technical disclosure are carried out as required; 6.
On September 26, Fujian Provincial Department of housing and urban rural development issued a notice on carrying out special safety rectification of divisional and subdivisional works with high risk.
The project department shall stop work for one day every month for inspection and “look back”.
Carry out hierarchical supervision.
Punishment measures: adhere to “zero tolerance” for violations found in the inspection, resolutely rectify those that should be rectified, resolutely stop work if they should be stopped, and resolutely punish those who should be punished.
All projects with accidents shall be ordered to stop work for rectification, and the pre-sale of residential projects or online signing of housing transaction contracts shall be suspended for filing, which can be resumed only after the resumption of work is approved.
All localities shall adopt a combination of online and offline methods to organize relearning and retraining on the relevant provisions of large and dangerous projects, such as the provisions on the safety management of high-risk divisional and subdivisional projects (Order No.
The specific shutdown time shall be determined by each project department in combination with the actual situation and reported to the local regulatory department and the construction unit.
The project department stops work for one day every month for inspection and “look back”.
In case of any violation of laws and regulations such as failing to prepare and review the special construction scheme for dangerous large projects, failing to conduct expert demonstration for ultra dangerous large projects in accordance with the regulations, and failing to organize construction in accordance with the special construction scheme, the competent construction department supervising the project shall notify its issuing authority and recommend that the safety production license of the construction unit be suspended.
Clear: it is decided that from now to the end of December 2021, the province’s housing and municipal projects under construction will carry out special safety rectification of dangerous and large projects for a period of three months.
The local regulatory authorities shall carry out supervision and inspection at the same time, carry out full coverage inspection on the projects under their jurisdiction, and organize enterprise technicians to enter the construction site for cross inspection to inspect the relevant conditions of the enterprise.
Joint punishment shall be highlighted.
31) of the general office of the Ministry of housing and urban rural development.
Work arrangement: enterprise self inspection and self correction.
Territorial supervision and inspection.
Whether the construction and supervision units have established safety management archives of dangerous and large projects as required.
Whether expert demonstration is carried out for ultra dangerous large projects according to regulations; 4.
All localities should take the opportunity of implementing the new production safety law, adhere to treating hidden dangers as accidents, strictly enforce safety law, and standardize the implementation of dynamic supervision and evaluation of project quality and safety.
The competent departments of cities divided into districts shall conduct full coverage supervision on the special rectification of counties (cities and districts) within their jurisdiction, and the provincial departments shall carry out supervision in due time.
The local regulatory authorities shall carry out supervision and inspection at the same time, conduct full coverage inspection on the projects under their jurisdiction, and organize the enterprise’s technical personnel to enter the construction site by means of cross inspection to inspect the enterprise’s safety control system of large-scale projects and the self inspection and self correction of potential risks of large-scale projects on the construction site, The potential safety risks found in the investigation shall be ordered to be rectified in place within a time limit.
Attached original text: Notice on carrying out special safety rectification of divisional and subdivisional works with high risk, district and municipal construction bureaus, and transportation and Construction Bureau of Pingtan Comprehensive Experimental Zone: according to the special action deployment arrangement of “strict law enforcement, strong tackling and promotion” by the provincial safety committee, compared with the recent quality and safety supervision and inspection of housing and municipal works in our province by the Ministry of housing and urban rural development, the main responsibilities are not fully implemented Due to problems such as inadequate implementation of process management of divisional and subdivisional works with high risk (hereinafter referred to as “dangerous works”), it is decided to carry out special safety rectification of dangerous works for three months from now to the end of December 2021.
The construction and supervision units shall strengthen the inspection and guidance of self inspection and self correction of projects under construction, urge each project department to establish a self inspection and self correction list, improve the safety control system of large-scale projects, eliminate on-site hidden dangers, and realize the closed-loop management of risk prevention and control of large-scale projects.
Each construction enterprise shall organize training for the management personnel of the enterprise and the project department to improve the safety technology management ability and ensure effective performance of duties; Strictly implement the safety technical disclosure and pre shift safety education system for front-line operators.
The specific notices are as follows: I.
Fixing Socket Angular End Nail Plate
The project Department of the construction and supervision unit of the provincial housing construction municipal engineering project shall immediately carry out self inspection and self correction focusing on the special rectification of large-scale dangerous projects, check the construction of safety control system for the relieved large-scale dangerous projects, check the construction of safety control system and on-site hidden dangers for the large-scale dangerous projects on site, and establish a list of all self inspection and self correction conditions one by one (see Annex 1-1 and 1-2 for details), Specify the specific problems, rectification measures, person in charge of rectification, rectification time limit and completion of rectification.
