longitudinal wall feedback your answer is correct.
The partition wall formed by nailing, coating or pasting the surface layer on the skeleton is ().
gable feedback your answer is correct.
block wall, plate wall, fabricated plate wall B.
Select one: A.
plinth D.
The text of the test questions can be divided into () according to the position of the wall on the building plane.
The correct answer is: skeleton and surface course test question 21 correct score: 1.00/1.00 mark the test question.
skirting feedback.
The text of the test question is set above the door and window opening to support the load transmitted from the masonry and floor slab on the upper part of the door and window opening, and these loads are transmitted to the horizontal load-bearing members of the walls on both sides of the door and window opening, which is called ().
plinth B.
Choose one: A.
Select one: A.
cement lime mixed mortar D.
lime mortar D.
The wrong statement about the characteristics of half brick partition wall below the text is ().
the transverse stiffness of the building bearing the longitudinal wall is weak, but the Bay layout is flexible.
non load-bearing wall C.
skirting feedback.
The text of the test questions is divided into () according to the structure.
the transverse stiffness of the building bearing the transverse wall is strong and the integrity is poor C.
The test questions of load-bearing wall and non load-bearing wall 6 correct score 1.00/1.00 mark the test question.
horizontal wall and vertical wall feedback your answer is correct.
One of the following statements about the load-bearing mode of the wall is () Choose one: a.
The text of the test questions is usually used to improve the durability of buildings and keep indoor dry and sanitary.
The correct answer is: lintel test question 15 correct score 1.00/1.00 mark the test questions.
windowsill B.
Your answer is correct.
solid wall, empty wall, composite wall C.
gable feedback your answer is correct.
The correct answer is: parapet test question 5 correct score 1.00/1.00 mark the test questions.
Choose one: A.
Choose one: A.
the load-bearing form in which the wall and column jointly bear the load transmitted from the horizontal members is called inner frame load-bearing B.
Choose one: A.
parapet D.
skeleton partition wall feedback your answer is correct.
feedback from the damp proof layer of the wall body.
Choose one: A.
enclosure C.
The correct answer is: partition question 17 correct score 1.00/1.00 mark the test question.
Choose one: A.
plate wall B.
Select one item: a.15mmb.5mmc.10mmd.18mm.
When building clay perforated brick, the thickness of horizontal mortar joint and vertical mortar joint should be ().
Your answer is correct.
suspender and skeleton C.
The correct answer is: vertical reinforcement partition 19 correct score 1.00/1.00 mark the test question.
Choose one: A.
daylighting feedback your answer is correct.
Your answer is correct.
Choose one: A.
open frame and hidden frame feedback.
Choose one: A.
vertical wall C.
partition D.
Your correct answer is: framed, frameless and point supported 23 correct score 1.00/1.00 mark the test question text frameless glass curtain wall, also known as ()..
medium block feedback your answer is correct.
framed, frameless and point supported; D.
lintel C.
load-bearing wall feedback your answer is correct.
load bearing B.
solid and durable wall.
ordinary brick partition feedback your answer is correct.
gable B.
suspender and surface course D.
cement mortar B.
skeleton and surface course B.
The wall built with brick and mortar is called ().
partition D.
The wall whose text is arranged along the longitudinal axis of the building is called ().
skirting C.
The correct answer is: cement mortar test question 9 correct score 1.00/1.00 mark the test question text the following masonry mortar is suitable for masonry in humid environment ().
parapet C.
apron C.
pressing block connection and hook connection; C.
wall damp proof course D.
The score was 77.00/77.00 and the score was 10.00/10.00 (100%) 1 correct score 1.00/1.00 mark the test questions.
flexible layout D.
partition feedback your answer is correct.
The drainage slope near the lower part of the plinth is called ().
horizontal wall B.
Choose one: A.
partition B.
The skeleton partition wall of the text of the test question is mainly divided into two parts, namely ().
Choose one: A.
Only half of the non load-bearing wall is called ().
block partition C.
Choose one: A.
on-site assembly and prefabricated assembly; B.
uncertain D.
large block C.
ring beam D.
Your answer is correct.
good sound insulation performance C.
brick wall D.
solid wall, empty wall, composite wall C.
Choose one: A.
ordinary brick partition wall D.
block partition wall B.
The correct answer is: apron test question 14 correct score 1.00/1.00 mark the test question.
block wall, plate wall, fabricated plate wall B.
Select one: A.
The wall detail structure is ().
Choose one: A.
It took 10 minutes and 34 seconds at thursday21:16 on October 21, 2021.
windowsill C.
apron B.
The correct answer is: cement mortar test question 10 correct score: 1.00/1.00 mark the test question text.
The function of the text wall does not include ().
Choose one: A.
The text of the test question is called ().
vertical reinforcement partition B.
transverse wall B.
Feedback your answer The correct answer is: the transverse stiffness of the building bearing the transverse wall is strong and the integrity is poor 8 correct score: 1.00/1.00 mark the test question text the masonry mortar with the highest strength is ().
brick wall, stone wall, plate wall D.
clay mortar C.
The correct answer is: plinth test question 13 correct score 1.00/1.00 mark the test question.
The correct answer is: horizontal wall and vertical wall test questions 2 correct score 1.00/1.00 mark the test question.
The text of the test question is used to separate the indoor space in the building, but it is not separated from the roof.
The text of the test questions can be divided into () according to the stress characteristics of the wall.
Your answer is correct.
lime mortar feedback your answer is correct.
The correct answer is 10mm 11 correct score 1.00/1.00 mark the test question.
The test question text is based on the skeleton.
parapet C.
wall damp proof course D.
cement mortar B.
The Wall load-bearing is divided into transverse wall load-bearing, longitudinal wall load-bearing, mixed load-bearing and inner frame load-bearing D.
easy disassembly B.
Your answer is correct.
Choose one: A.
separation D.
gable D.
small block B.
The correct answer is: small block test question 12 correct score 1.00/1.00 mark the test question the part of the surface protection and finishing treatment near the outdoor ground of the external wall body of the test question body is called ().
parapet C.
The correct answer is: easy disassembly 22 correct score: 1.00/1.00 mark the test questions.
apron feedback your answer is correct.
Your answer is correct.
plate partition D.
The correct answer is: longitudinal wall test question 4 correct score 1.00/1.00 mark the test question text the wall around the house on the top of the roof is called ().
Choose one: A.
plate partition wall C.
load-bearing wall, non load-bearing wall D.
The correct answer is: Wall damp proof course 16 correct score 1.00/1.00 mark the test question.
The block with a single mass of no more than 20kg in the text of the test question belongs to ().
feedback from interior wall and exterior wall.
It started at thursday21:05 on October 21, 2021, and the status has ended.
The correct answer is: skeleton partition wall test question 20 correct score: 1.00/1.00 mark the test question.
The correct answer is: brick wall test question 3 correct score 1.00/1.00 mark the test question.
The correct answer is: daylighting test question 7 correct score 1.00/1.00 mark the test question text.
brick wall, stone wall, plate wall feedback.
clay mortar C.
open ditch B.
cement lime mixed mortar feedback your answer is correct.
The correct answer is: partition test question 18 correct score 1.00/1.00 mark the test question text skeleton partition, also known as ().
