() the correct answer is “yes” For buildings on soft foundation, it is forbidden to set settlement joints.
() the correct answer is “wrong”..
It should be made into staggered joint and tongue and groove joint.
The correct answer is: thermal insulation joint The deformation joint set to prevent the structural deformation of buildings caused by uneven settlement of foundation is ().
() the correct answer is “yes” The width of the foundation settlement joint is the same as that of the superstructure.
It took 30 seconds at friday21:54 on October 22, 2021.
The correct answer is: seismic joint test questions The deformation joint that must be disconnected from the foundation to the roof is ().
Because the foundation is buried underground, the joint must be filled.
The status has been completed.
The correct answer is: settlement joint The artificial gap set in advance to reduce damage to buildings and ensure sufficient deformation width of buildings is usually called ().
() the correct answer is “yes” In order to eliminate the uneven settlement of the foundation, the foundation settlement joint shall be set as required.
() the correct answer is “wrong” The spacing of expansion joints is related to the type of structure, the type of roof of the house, and whether there is thermal insulation layer and thermal insulation layer.
It started at friday21:53 on October 22, 2021.
() the correct answer is “wrong” According to the different foundation types of buildings and the adjoining parts of houses built by stages, settlement joints should be set.
The score was 18.00/18.00 and the score was 10 / 10.00 (100%) In order to prevent the building from deformation caused by temperature change, the deformation joint is ().
The wider the expansion joint in the text of the test question, the better.
() the correct answer is “wrong” The structural treatment principle of roof deformation joint is not only to ensure the possibility of free deformation of the roof, but also to prevent rainwater from penetrating into the room through the deformation joint.
() the correct answer is “wrong” When the same building structure is different, expansion joints must be set instead of settlement joints.
The correct answer is: settlement joint The settlement joint in the text of the test question is also called temperature joint.
() the correct answer is “yes” According to the architectural design, the roof deformation joint can be set on the equal height roof of the same floor or at the junction of high and low roofs.
() the correct answer is “wrong” Due to the different wall thickness, the settlement joint can be made into flat joint, staggered joint and tongue and groove joint.
() the correct answer is “yes” 9.
The correct answer is: deformation joint The correct answer is: expansion joint, settlement joint and shockproof joint 5 text of test questions in areas with high seismic fortification intensity, when the shape of buildings is complex and there is a large difference in structural stiffness and height, it should be set at deformation sensitive parts ().
() the correct answer is “wrong” The method of shockproof joint in the text of the test question is the same as that of expansion joint.
