Floor plan view creation is complete 3 Link the CAD file and create the grid of the building project file.
Refuse to talk on paper, improve operation skills and accumulate from bit by bit.
Practical operation is also a key step.
Enter the “a_7f_17.600” floor plan view, link the building plan – “fifth to twenty seventh floor plan”, and ensure that it is locked to create the grid of the building project file.
Create a building project file grid 4 Save click the Save button, specify the save location and name it “jhc-22#a-1.0”, and save the project as a “.
Except for “positive and negative zero elevation”, the header is set to “upper header”, and the name is the same as “a_7f_17.600”, As shown in the following figure, click View – plan view – floor plan to create a new floor plan view by selecting all elevations in the pop-up new floor plan view dialog box.
1.
Create corresponding floor plan view command select the floor without floor plan view.
RVT” format file.
Select “building template” in the option of “template file”, confirm that the “new” type is “project”, and establish a building model project file, as shown in the following figure: building project file creation 2 Create the elevation and floor plan view of the project file, enter any elevation view, switch to the corresponding elevation view, take “north elevation” as an example, refer to the elevation information of each floor given in “construction-201-1 section”, and establish the elevation of the building project file.
Where cited or.
In case of infringement, please contact us in time and we will deal with it at the first time.
WeChat search official account: BIM Industry Alliance pays attention to us! If you want to systematically master BIM skills, you can’t just stay on theoretical knowledge.
The content copyright of BIM Industry Alliance belongs to the original author.
Today, let’s learn the Revit practical skills of building elevation and grid creation.
Create a building project file, click the button in the upper left corner of Revit, select the command “new → project” in the list, and the “new project” dialog box pops up.
