Jianjiantong media ID: jianzhong001 the legal Spring Festival holiday is over, and the construction sites have resumed construction one after another
.
As the construction site has been shut down for many days, the unsafe factors increase when all kinds of machinery and equipment are re used, and the unsafe state is easy to appear
.
After a long holiday, workers are prone to suffer from “holiday syndrome”, physical and mental fatigue, irritability, lack of concentration, and easy to produce deviation at work, especially for electricians, welders, crane drivers and other special operators
.
Once they violate the safety operation regulations and misoperate, it is very easy to cause safety production accidents
.
In addition, there are many new workers on the construction site after the festival, their safety awareness is relatively weak, and unsafe behaviors occur from time to time
.
Therefore, after the festival is the construction site safety production accident prone period
.
The project department should strengthen the safety supervision of the construction site before returning to work after the festival, strictly check the hidden dangers of accidents, conscientiously do a good job in the safety inspection before the construction, strictly control the responsibility implementation, personnel training, hidden danger investigation and equipment detection, and carry out a comprehensive safety inspection on the construction site, and only those meeting the requirements of safety production can return to work, so as to ensure the safety of construction
.
The first step is to further implement the main responsibility of work safety and improve the responsibility system of work safety
.
Clear the scope of safety responsibilities of management personnel at all levels, clear the safety responsibilities of enterprise leaders, project managers, heads of relevant functional departments, team leaders and front-line production workers, and make full-time personnel
.
Strictly implement the system of safety management personnel on duty at all levels, require the management personnel to go deep into the front line and command ahead, and ensure that the safety production rules and regulations are not verbal, but are effectively implemented in each production post and the whole production process of employees
.
It is necessary to improve the sense of safety production responsibility of management personnel, establish the concept that irresponsible safety management personnel is dereliction of duty, illegal command is a crime, through the conscious action of management personnel, drive the majority of workers to consciously pay attention to safety, always pay attention to safety, seriously abide by the rules and regulations of safety production, consciously eliminate illegal operations, eliminate all kinds of unsafe behaviors, and resist illegal instructions To reduce the occurrence of all kinds of safety production accidents
.
The second pass: personnel training
.
Before returning to work, we should carry out safety training for all staff, learn the national laws and regulations on safety production, and learn all kinds of safety operation specifications, procedures and safety management systems
.
It is necessary to organize electricians, welders, tower crane drivers and other special operators to participate in safety training, so as to work with certificates
.
In particular, it is necessary to carry out safety education and training for new workers and transferred workers, make clear the safety precautions during construction, and give safety tips for key links and key equipment of construction, so that they can be familiar with the working environment and equipment of construction site as soon as possible, and master the safe operation technology
.
It is necessary to seriously analyze the causes of the common unsafe behaviors in violation of the operation regulations in the construction, put forward the safety precautions, and put an end to the safety production accidents caused by the unsafe behaviors of the workers
.
It is necessary to educate employees to strictly abide by the rules and regulations of safe production, strictly abide by the operating rules of safe production, strictly abide by the labor discipline, resolutely refuse the command against rules and regulations, and promptly stop the unsafe behaviors of others, so as to reduce the accidents of safe production caused by human misoperation
.
The third pass: hidden danger investigation all construction sites should organize special investigation of hidden danger on construction site before returning to work, focusing on the investigation of high formwork, deep foundation pit, hoisting and other dangerous sub projects, so as to control and prevent accidents such as falling from height, construction collapse and so on
.
Check the building edge, hole fall, climbing operation, operation platform fall, construction basket, construction elevator protection is not tight fall and other safety hazards, to prevent falling accidents
.
Check the foundation pit slope collapse, scaffold collapse, large formwork collapse, collapse of various components and materials, collapse of workers’ dormitory and other temporary facilities and other safety hazards to prevent collapse accidents
.
Check whether the temporary power wires on the construction site are soaked, aged and leakage, whether the temporary power is laid according to the three-phase five wire system, whether the three-level distribution and two-level protection meet the requirements, etc., so as to prevent electric shock accidents
.
Check the earthwork excavation engineering, underground excavation engineering and other dangerous operation links and dangerous parts which are prone to mass casualties
.
The fourth pass: check the equipment
.
Before the construction site returns to work, check the tower crane, construction elevator, Grillage and other large equipment, focusing on whether the torque limiter is out of order, whether the overload operation, whether the crane wire rope is firm, whether the anti decoupling device is out of order, whether the disassembly scheme is formulated, whether the inspection and acceptance procedures are fulfilled, and whether the disassembly and use on site meet the safety requirements Please
.
It is necessary to ensure that all kinds of safety facilities on the construction site are free from defects, sensitive, reliable and firm, and can play a corresponding role in safety protection
.
It is strictly forbidden to undertake the installation and disassembly of construction hoisting machinery without safety production license, qualification certificate or beyond the scope of qualification business; it is forbidden to work without special equipment operation certificate; the construction hoisting machinery and climbing scaffold with serious potential safety hazards shall be stopped and rectified by the responsible unit to eliminate the potential safety hazards in time To prevent lifting injury caused by crane overturning and other accidents
.
(source: integrated in the network, the pictures and copyright belong to the original author, if there is any infringement, please contact to delete it!) Long press QR code to follow us ▶▶▶。
.