From the outside, many changes have taken place at the facade level.
Therefore, in the standardized production of variable system industrialized products, the number of product colors affecting the appearance of houses can be uniformly limited, so as to realize the coordination of the overall style of the city.
This has no impact on the core concept of open housing.
Nowadays, the same high-rise residential buildings are common in cities, and the identifiability is getting lower and lower.
The opening of the house is not only the change of the layout of each floor, but also the difference of external walls, doors and windows products used in different layouts, which may lead to too many inside and lack of organization and logic.
In the range of species, because the color has the most direct impact on the appearance, limiting the color range of the exterior wall can significantly reduce the change of the facade without losing diversity, and may be more abundant.
Therefore, when designing the residential facade, architects use various methods to seek the facade change, which is actually a design method that puts the foundation at the end.
In this way, the impact of the richness of variable system products on the overall coordination of residential appearance can even be ignored, and residents have more freedom to play.
In this way, the unified overhanging floor can effectively form line of sight occlusion, weaken the vertical wall and facade changes of doors and windows, form a sense of hierarchy and regularity, and also play the role of horizontal sunshade.
The diversified combination of various functional spaces forms a rich and changeable suite outline, and different courtyard like spaces are correspondingly divided on the sub ground.
Open houses avoid this situation.
This design embodies the true expression of architectural language.
Strictly speaking, this unified facade component should belong to a constant system, because it is built when building the structural system, not by the residents themselves.
However, 360 only changes the layout space between the floors of the house, and the whole building still adopts the unified facade language of exterior walls, doors and windows, columns and so on.
Built in Sao Paulo, the largest city in Brazil, 360 residence is a good example.
Therefore, the courtyard has become an important part of the open portal.
In case of fire, residents can break the light partition wall between the balconies of the two houses and escape from other doors.
Generally speaking, two normative measures can be taken in the facade design of open houses.
There are many ways to add ingredients in combination with climate.
The first is to limit the variable system industrial products that affect the appearance, and the second is to build a unified facade component.
Residents have design control over their own living space.
In Japan, no matter how big the house is, there is a relatively large proportion of balconies for various household activities and storage..
There can be more changes inside without affecting the appearance.
As for the color of appearance, it does not affect their daily use requirements, so limiting the color change of appearance will not affect the diversity of open houses.
The project includes 62 houses with courtyards and seven different layout modes, which are composed of 130 square meters, 170 square meters, 250 square meters and 415 square meters respectively.
Taking Lingnan as an example, external sunshade components can be set, such as horizontal sunshades at the floor position.
Consistent external balcony railings can form regular or full of changes.
By comparing the modeling and area calculation methods of residential balconies in Japan, South Korea and Hong Kong, it can be seen that the balconies in Japan, whether located in warm environment or cold area, are open, which not only allows residents to have direct contact with outdoor fresh air, but also facilitates the fire prevention and rescue of high-rise houses.
The external railing is completely separated from the internal nested partition and the types of wall doors and windows, and does not affect each other.
Although the design method of open house is not adopted, the layout of different apartments on each floor is a big step forward compared with the ordinary “standard apartment”.
The single reflection of the indoor living space is monotonous and lacks the facade change in the external effect.
Different layout modes are composed of external walls, doors and windows in different positions.
In the last way, the opposite impact is relatively greater, which can be said to be completely separated from the facade effect of nested exterior walls, doors and windows.
How to design the compound and its proportion in the whole land directly affect the residents’ experience.
For example, the exterior wall products of an open house can be products of different models and materials produced by different manufacturers, but the exterior wall color used in the building should be limited to 4 ~ 5.
The main reasons for this phenomenon are: single setting design, unified facade components, repeated design method, standardized construction method, design idea of separation of skin and function, etc.
In order to coordinate the overall appearance of open houses, in addition to limiting the methods of variable system products, unified facade components can also be built in combination with local natural climate conditions.
Therefore, the facade of the house is the external expression of different types of apartment combinations, not deliberate division and combination.
The purpose of the open day is to hope that residents can design their own houses in the air like single houses, and can also get houses with houses and homes in crowded cities.
This is a prominent feature of the design achievements of open houses.
Each floor contains two to four combined units.
Limiting industrial products that affect the appearance of houses does not mean strictly limiting the types of products, but appropriately limiting the characteristics that affect the appearance.
Therefore, certain measures should be taken in the design to standardize the facade form of the house, so as to make the architectural appearance more harmonious and the urban style more rich and unified.
Therefore, it is necessary to put forward some guiding suggestions for the design of similar hospitals, and give some normative measures when necessary, so as to ensure the practicability and space utilization of open houses.
Or a movable vertical sunshade component is set between the two floors to form a consistent change law from the surface layer, weaken the change effect of the inner facade, and the vertically moving sunshade louver plays a more flexible sunshade role; In addition, the unified setting of balcony railings can also make the facade effect more harmonious.
What residents really need is adaptable indoor space.
