The General Code for Construction Quality Control of Building and Municipal Engineering will be implemented on March 1!

It will be implemented from March 1, 2023.

The original text of the attached specification: 1 The General Code for Construction Quality Control of Building and Municipal Engineering is now approved as the national standard, with the number of GB55032-2022, and will be implemented as of March 1, 2023.

4、 Article 3.0.4, 3.0.6, 3.0.8, 5.4.1, 5.4.2 and 5.7.4 of JGJ190-2010 Technical Management Code for Inspection and Test of Building Engineering.

2、 Article 5.0.8 and 6.0.6 of the Unified Standard for Construction Quality Acceptance of Building Engineering (GB50300-2013).

Doka Floor Prop Nut

gov.cn) and published by China Construction Publishing Media Co., Ltd.

Article 3.1.4, 6.1.11, 6.1.12, 7.1.12 and 11.1.12 of the Standard for Quality Acceptance of Building Decoration Engineering (GB50210-2018).

3、 Article 3.0.3, 3.0.4, 3.0.10, 3.0.13, 4.1.1, 4.2.1, 4.4.10 and 5.4.1 of the Technical Management Code for Quality Inspection of Housing Construction and Municipal Infrastructure Engineering (GB50618-2011).

At the same time, a large number of mandatory provisions related to the current engineering construction standards have been abolished.

In case of any inconsistency between the relevant provisions of the current engineering construction standards and this specification, the provisions of this specification shall prevail.

organized by the Institute of Standards and Quota of the Ministry of Housing and Urban-Rural Development.

The Ministry of Housing and Urban-Rural Development issued the national standard General Code for Construction Quality Control of Building and Municipal Engineering.

Full text of the standard issued by the Ministry of Housing and Urban-Rural Development on July 15, 2022
.

At the same time, the relevant mandatory provisions of the following engineering construction standards shall be repealed: 1.

This specification is published on the portal website of the Ministry of Housing and Urban-Rural Development (www.mohurd.

This specification is a mandatory engineering construction specification, and all provisions must be strictly implemented.

Tags: Precast

Construction scaffold safety management system training, see this one is enough!

Please click the standard atlas above to subscribe for free! 1、 The scaffold is one of the common temporary facilities in the construction site . It refers to the frame

Member Li Xinggang: If the competition in the architectural design market is disorderly, it will be difficult to support the high-quality

Li Xinggang, member of the National Committee of the Chinese People’s Political Consultative Conference and chief architect of the China Academy of Architectural Design and Research. On March 3rd, Li

Visual three-dimensional node Atlas of building hardbound Engineering (rich graphics and texts)

(see the way to obtain the complete electronic version of this data from the drop-down list) Catalogue: Chapter I ground engineering, Chapter II ceiling engineering, Chapter III light partition engineering,

The General Code for Construction Quality Control of Building and Municipal Engineering will be implemented on March 1!

Related Post

Construction scaffold safety management system training, see this one is enough!Construction scaffold safety management system training, see this one is enough!

Member Li Xinggang: If the competition in the architectural design market is disorderly, it will be difficult to support the high-qualityMember Li Xinggang: If the competition in the architectural design market is disorderly, it will be difficult to support the high-quality

Visual three-dimensional node Atlas of building hardbound Engineering (rich graphics and texts)Visual three-dimensional node Atlas of building hardbound Engineering (rich graphics and texts)